Toyota Altis : DIY Erase claws on the gage glass

Claw lines always appear when many people try to clean the gage with rough clothes. This is a way to fix it become as it was.

Material :

1. Plastic clear coating

How to do :

1. Use cotton wool and coat the liquid coating on gage glass.

2. Let it dry and do it twice.

Nissan Tida : DIY keyhole light

The original Nissan Tida don't have keyhole light from factory, but you can make it by use the Tiana part instead. Anyway this job needs electrical and mechanical skill too.

Material :

1. Nissan Tiana part code 48476-9Y000

How to do :

1. Take off handwheel neck and take off keyhole set

2. Wire power line and jack it to a new keyhole part

3. Sheer the original hole because the Tiana part is bigger.

4. Install a new keyhole set and cover the handwheel neck.

Chevrolet Aveo : DIY side mirror bumper guards

I've always seen many scratches at mirror side covers. This's an easy tip to protect them.

Materials :

Bumper guards

How to do :

Just paste them at the position you think they're right.

Toyota Camry : DIY Air Filter

Today I have an idea to add an air filter in Camry to make a better air quality and avoid air coil dirt. This tip is not for any newbie, you must have some skills to fix the console.
Materials :
1. 3M air filter part for Toyota Wish
2. Plastic tray
How to do :

1. Find the inflow air hole under the console.

2. Cut the rim of 3M air filter to suit the Camry hole shape because Wish air hole is bigger than Camry is.

3. Make a rigid frame from plastic tray to be an air filter support.

4. Cut the original barrier to make a work space.

5. pull down the plastic frame.

6. Top the air filter on the frame. Beware to install the right side of air filter on the direction of air flow.

7. Release the motor plug for turn on an outside air inflow damper to avoid it hit the new air filter.
8. Finish.